Back to Strip Joining PressesFor Strip
|
SELF-LOCKING STANDARD (WR) DESIGN - SINGLE AND DOUBLE ROW MODELS AVAILABLE
This stitch has two point locking. Tension must be applied after making the stitch in order to shift lock it into position and prevent the material from coming apart. The stitch will lock if pulled from either direction. Ideal for operations joining thicker materials where the extra strength of the arrow design is not needed. SELF-LOCKING ARROW (AP) DESIGN - SINGLE & DOUBLE ROW MODELS AVAILABLE
This style of stitch has four point locking, providing approximately twice the strength of the standard design. This stitch is shift locked in the same manner as the standard design, but will lock only in one direction. Therefore, with this design the leading edge must always be on top or always be on bottom in order to work. Ideal for operations which are joining thin materials or a range of thicknesses which include thin materials. In addition, this stitch is preferred in operations where the "tab" created in the standard design would create roller or material damage if it were to break off. STRAIGHT SIDED DESIGN - SINGLE ROW MODELS AVAILABLE
This design is not self-locking and requires that a precut strip or rod be inserted through the row of stitches to obtain a holding stitch. Contact Behlen Mfg. Co. for information on our NEW dies that can improve throughput time by 1/3. |
